Free US Shipping for Orders $50+

Welcome to ORLY FX

You've got the magnet. Let's make your first cat eye velvet effect.

Four steps, about 10 seconds in the magnet per coat, and no steady hand required. Here's everything you need to get it right the first time.

Heads up: the magnet only creates an effect with magnetic nail polish, like ORLY FX Magnetic shades.

ORLY FX Cat Eye Magnet

How to use your magnet

Four steps to a cat eye

Start on clean nails with your favorite ORLY basecoat.

  1. Applying a thin first coat of magnetic polish

    First coat

    After base coat, apply a thin coat of the magnetic polish and let it dry.

  2. Finger placed in the center of the magnet

    Finger placement

    Place your finger in the center of the magnet.

  3. Applying a second coat with the finger in the magnet

    Second coat

    Apply a second coat in the magnet and wait 10 seconds, or until the design is set, before removing.

  4. Applying topcoat while in the magnet

    Topcoat

    Finish with your favorite ORLY topcoat while in the magnet and wait 10 seconds before removing.

Tip: wipe any polish off the magnet with alcohol before you put it away.

Nail with no magnet next to nail with cat eye magnetic effect

See the difference

Same polish. Add the magnet.

Without the magnet, FX shades wear as a gorgeous shimmer. With it, the magnetic particles shift into a dimensional band of light that moves every time your hand does.

Cat eye or velvet?

Both. The soft, glowing finish this magnet creates is a cat eye effect, and you'll also hear it called a velvet effect.

Designed for first-timers

Built so you can't get it wrong.

Your finger rests in the groove, so the magnet lines up the effect the same way, nail after nail.

  • Strong magnetic pull

    Creates a mesmerizing cat eye effect.

  • Wide opening

    Room to paint with the magnet in place.

  • Finger groove

    For consistent results, every time.

  • Non-slip bottom

    Secure, controlled use on the table.

ORLY FX Cat Eye Magnet: strong magnetic pull, wide opening, finger groove and non-slip bottom

Troubleshooting

Questions, answered

Why did my design go away after I applied topcoat?

The solvents in nail polish can make each layer "wet" again, so the magnetic particles can move around. Apply your topcoat while your finger is in the magnet and wait 10 seconds before removing.

Will the magnet work with my regular nail polish?

No. The magnet only creates an effect with magnetic nail polish, like ORLY FX Magnetic shades.

How long should I hold my finger in the magnet?

At least 10 seconds, or until the lacquer is set, so your design stays in place.

Should I magnetize every coat?

Let your first coat dry without the magnet for an opaque base. Then apply your second coat and topcoat inside the magnet to create the cat eye effect.

Do I need a UV or LED lamp?

Not for ORLY FX Magnetic Nail Lacquer. It air-dries like traditional nail polish.

How does magnetic nail polish work?

It contains special particles that respond to a magnet while the polish is wet. The magnet shifts them into light-catching, dimensional patterns.

Can I wear magnetic polish without the magnet?

Yes. Without magnetizing, it wears as a beautiful shimmer or multichrome finish.

Can I create different designs?

The ORLY FX Cat Eye Magnet is designed for an easy, consistent cat eye, but you can play with other magnets for different designs.

Your next cat eye

ORLY FX Magnetic shades

Every shade works with your magnet.

ORLY FX Magnetics Complete Bundle

Already have the magnet?

ORLY FX Magnetics Complete Bundle

All six ORLY FX Magnetic shades, no magnet included.

$131.00$145.00

Complete the routine

Prep and seal for a cat eye that lasts