Professional? Save big on all products with ORLY+

Ombre Brush

$10.00

Unit price: per

Similar Colors

Quantity

(0 in cart)

Quantity

Ombre Brush

$10.00

Unit price: per

Shipping calculated at checkout.

Seamlessly blend colors for a smooth, gradient effect with our ultra-soft ombre brush. Whether you're working with ORLY lacquer or GELFX, this brush ensures a flawless ombre with minimal effort using the drag and tap method.

How To Use

1

LOAD

Load your brush on your palette by running the bristles through your GELFX Color or lacquer until you see each bristle flow separately.

2

ROLL

Roll your brush in the product as you pull away to remove excess product and now you're ready to paint your design with evenly coated bristles.

3

CLEAN

Clean by gently squeezing out excess gel with a dry Lint-Free Wipe. For lacquer, use a Lint-Free Wipe saturated in Genius Remover.

Frequently Asked Questions

Questions about brush care

If using our brushes with lacquer, clean your bristles by soaking a lint-free wipe in Genius Remover, gently squeeze the bristles while rolling and pulling the brush straight out. Repeat until all lacquer is removed. Do not bend the bristles.

If using our brushes with gel, clean your bristles with a dry lintfree wipe by gently squeezing the bristles while rolling and pulling the brush straight out. Repeat until all gel is removed and make sure not to bend the bristles. If there is still pigment left in your bristles, wave your bristles back and forth in clear gel like our GELFX basecoat or topcoat until all the pigment releases from the brush. Then squeeze the excess gel out with a dry lint free wipe.

If using your brushes with lacquer, make sure to clean your brushes thoroughly using the technique discussed above and replace your cap. If using gel, after cleaning your brush, roll the bristles in a small amount of clear gel (GELFX Basecoat or Topcoat) to keep the shape of the bristles and immediately replace the cap to ensure no sunlight reaches the bristles. Since our caps are secure, there is no need to store the brushes upright or in a specific place but we always recommend keeping them in a pouch or brush cup to stay organized.

There’s 2 things you can do! First, try the soap method. Grab a bar of soap and dip your brush in water before coating the bristles in soap by dragging it back and forth over the bar. Shape the bristles and allow it to dry. This should keep your brush in perfect shape!

If your brush is a little too far gone for the soap method, grab a pair of small scissors and gently trim off the stray bristles at the base of the brush.

If using our brushes with lacquer, clean your bristles by soaking a lint-free wipe in Genius Remover, gently squeeze the bristles while rolling and pulling the brush straight out. Repeat until all lacquer is removed. Do not bend the bristles.

If using our brushes with gel, clean your bristles with a dry lintfree wipe by gently squeezing the bristles while rolling and pulling the brush straight out. Repeat until all gel is removed and make sure not to bend the bristles. If there is still pigment left in your bristles, wave your bristles back and forth in clear gel like our GELFX basecoat or topcoat until all the pigment releases from the brush. Then squeeze the excess gel out with a dry lint free wipe.

If using your brushes with lacquer, make sure to clean your brushes thoroughly using the technique discussed above and replace your cap. If using gel, after cleaning your brush, roll the bristles in a small amount of clear gel (GELFX Basecoat or Topcoat) to keep the shape of the bristles and immediately replace the cap to ensure no sunlight reaches the bristles. Since our caps are secure, there is no need to store the brushes upright or in a specific place but we always recommend keeping them in a pouch or brush cup to stay organized.

There’s 2 things you can do! First, try the soap method. Grab a bar of soap and dip your brush in water before coating the bristles in soap by dragging it back and forth over the bar. Shape the bristles and allow it to dry. This should keep your brush in perfect shape!

If your brush is a little too far gone for the soap method, grab a pair of small scissors and gently trim off the stray bristles at the base of the brush.